BLOG

So, you’re planning on going for your first fishing trip. While you may be preoccupied with the many preparations that you have to make, it’s important to remember that preparing goes beyond just the equipment that you’ll be bringing. To really be prepared for that upcoming first trip, there are certain things that you will have to know.

One great example of this is learning how to tie a proper fishing knot. Now, what you may not be aware of is that there are actually quite a few knots used for fishing. This can make it rather difficult to get into, especially if you’ve had no prior experience doing this. 

To help you out, we’ve prepared a list of the best fishing knots that will surely prove to be useful for your next trip!

Trilene Knot

Let’s start things with something simple. The Trilene Knot was specifically created to use with monofilament lines. It’s great for joining swivels, leaders, and lures to mono and fluorocarbon. It’s an easy knot to learn how to tie, and you should be able to do it after a few rounds of practice.

Here’s how to tie this knot:

1. Run the tag end of the line through the hook eye. Be sure to do this twice, all while forming a small loop.
2. Pinch the loop between your thumb and forefinger. You need to do this to hold it in place so that you can wrap the tag end of the line around the standing line. You need to do this at least five times and pass the end back through the loop.
3. Moisten everything and draw it tight.

Palomar Knot

This knot is necessary as you’ll need to learn it to join super lines to leader or lures. While there are other knots that can do this, none of them match up to the Palomar Knot. Luckily, this knot is as easy to tie as it is strong.

Here’s how to tie this knot:

1. Double around six inches of the mainline and run it through the hook eye.
2. From there, double loop back and make an overhand knot around the double line. Be sure to leave a large enough loop so that the hook or lure can pass through.
3. Pull the loop down and around the hook or lure.
4. Moisten thoroughly and pull both ends of the line until it’s drawn tight.

Eugene Bend Knot

Lastly, we’ll end it with the Eugene Bend Knot. This knot is extremely strong and quite easy to tie, which makes it a good choice for beginners. When tying this knot, be sure to listen for a slight pop when you draw it tight, as this indicates that you tied it properly.

Here’s how to tie this knot:

1. Pass the tag end of the line through the hook eye until it forms a long loop.
2. Wrap the loop around the standing line four times.
3. Run the tag end through the loop.
4. Moisten and draw it tight.

Conclusion

Hopefully, we’ve laid out enough information to get you started on how to tie the best fishing knots. While it may take some work on your part to learn these knots properly, knowing how to tie knots is an invaluable skill to have, especially if you’re looking to take fishing seriously. On top of that, there are fishing knot tools to help make this process easier for even the most inexperienced fishing enthusiasts.

If you need help tying fishing line knots, then our fishing knot tool is just what you need. We at Hook-Eze are dedicated to making your next fishing trip a breeze. Our device is made to provide you with a stress-free experience when it comes to knot tying, and it’s a practical solution for both beginner and experienced fishing enthusiasts in Australia. Visit our website and purchase yours today!